crank but no start 2004 sebring 2.7

Reply Subscribe

Thread Tools

Search this Thread

Dec 11, 2013 | 06:42 PM

johnkraus

Thread Starter

Junior Member

Joined: Dec 2013

Posts: 3

From: olmsted falls,ohio

crank but no start 2004 sebring 2.7

changed oil pump put back together engine cranks but will not start.no spark at plugs.spins fast but no start.unpluged cam sensor and it starts.turned it off plugged in sensor and it would even try to start!

Dec 11, 2013 | 11:09 PM

CHRYSLER TECH

Super Moderator

Joined: Mar 2006

Posts: 9,135

From: Norcross GA

u installed the wrong cam tone wheel mmmm u get to take it back apart and put the old cam tone wheel b

Dec 12, 2013 | 07:17 AM

johnkraus

Thread Starter

Junior Member

Joined: Dec 2013

Posts: 3

From: olmsted falls,ohio

didnot change tone wheel .Took it off to get slack in chain to remove crank gear and remove oil pump,put same gear (tone wheel) on.is it possible to damage it?

Dec 12, 2013 | 08:24 AM

johnkraus

Thread Starter

Junior Member

Joined: Dec 2013

Posts: 3

From: olmsted falls,ohio

didnot change gear(tone wheel). took it off to get slack in chain to remove crank gear and remove oil pump,put same gear (tone wheel)on.is it possable to damage it.