so i read alot of post and i am having what seems to be a common problem in a 2000 sebring while driving it will cut off or wont start at times. i would love to replace my crank shaft senser can any send me a pic of where it is or explain where and how to replace it thank you

 

Which engine? Which model?

 

it is the 2.5 model jxi 2000

 

On the 2.5, the crank sensor is located under the distributor near the bell housing of the transmission.

 

thanks for the reply again i am still a little confused as to were it is i have looked online and it gave me two locations one was by the strut tower and the other was above the oil filter ARE ANY OF THESE IN THE DIRECTION YOU ARE POINTING ME IN ALSO after speakng with a couple people they said that the sensor is fragile any advice on replacing it....and also its a shot in the dark but would any one have a picture of the location or how to replace or a link to it

 

Spend 20 bucks at your local autoparts store and buy a Haynes manual for your car. It'll be money well spent.