First post, new user.

I have an 03 Sebring LX. Tonight for the first time the driver side power lock switch quit working. The passenger side works just fine along with the fob.
Any suggestions as to where I should start looking? I'm assuming it is a ground issue, but am open to other possibilities.

Thanks
Geekmedic

 

get to the switch connection and add power or ground to it see what the locks do from that

 

Managed to get the inner panel off and got the lock switch off. When I hook my test light up it appears as though I have 0 power. Pulled the switch apart completely manually operated the switch and nothing.

Test light does not light on any of the wires, Red, Black, or White w/green.
Hoping for an answer.

Geekmedic

 

After rechecking my ground on the test light, Red has power.
Rigged up a ground patch, to the black, still no action from the lock mechanism.

 

Yet another correction. After reassembling the door, now in the closed and first position the power lock works, in the second (wide open) position it does not. Scratching my head over this one.

 

why are u scratching your head? u found the issue replace the switch