Sebring 2010 2.7 v6 137kw misfire problem
Thread Starter
|
Junior Member
Joined: Nov 2015
Posts: 3
Sebring 2010 2.7 v6 137kw misfire problem
Hi.
So here is the problem.
I start the car with cold engine and everything is OK.
But when it cools (for example I go to shop and come back), after that it has one cylinder missing. If engine cools way down (for example it stays over night) then all is OK.
I have an OBD reader and it says P0203 Injector 3-circuit malfunction.
So I'm guessing the problem is with injector 3
My question is what is the cilynder order for my engine(Can't find it in the internet). And is the problem with injector or wiring?
Thanks for the help
So here is the problem.
I start the car with cold engine and everything is OK.
But when it cools (for example I go to shop and come back), after that it has one cylinder missing. If engine cools way down (for example it stays over night) then all is OK.
I have an OBD reader and it says P0203 Injector 3-circuit malfunction.
So I'm guessing the problem is with injector 3
My question is what is the cilynder order for my engine(Can't find it in the internet). And is the problem with injector or wiring?
Thanks for the help
Thread
Thread Starter
Forum
Replies
Last Post
Dadgummit
Chrysler 200 & Sebring
5
Dec 21, 2020 05:38 PM
bunchakids
Chrysler Voyager & Town & Country
3
Nov 5, 2013 01:30 PM