Its a pleasure to meet everyone. I own a 2008 Chrysler Aspen I am a mechanic by profession, and I bought this SUV with the intentions of making it a beast. I like the idea of driving around looking like the kids are headed to soccer practice, only to see it leave you sitting still at the stop light. I have done a plethora of upgrades to it so far, and have improved it all around. My end goal is to have it at least as good or slightly better then a 6.1l hemi. So far I am pretty sure I have close to if not over the starting whp.
Anyways, shortly, if I can get it formatted well enough, and the forum allows me to post it, I will hopefully be posting a walk through, parts comparison, and check list of what you need to perform a 6.1l intake manifold one a 2007/2008 chrysler aspen hemi. I currently have all the parts ready to go on tomorrow, and will be doing the work as long as I dont get called out on a repair job some where before I start taking it apart. Once its apart, no ones getting my helpnuntil its together and driving again. I've worked a bunch on putting this walk through together, and have added pictures of parts, hyperlinksntongood vendors, and even a checklist to make sure you've gotten everything you need as you go along. I'm even adding some things I realized when I wqs first going to install it, that I ended up holding off while a couple more items were ordered. So, hopefully it comes out good, and I can post it here soon. And if I remember to taken the pictures as I go, ill upload those to the post also, sonyou can have visual indicators to help you along.
Sorry for the length of my greeting. But hopefully this next post will be welcomed once I finish it