2006 no low beam on passenger side

Reply Subscribe

Thread Tools

Search this Thread

Nov 27, 2011 | 06:18 PM

Pappy118

Thread Starter

Junior Member

Joined: Nov 2011

Posts: 6

2006 no low beam on passenger side

Any info. would be much appreciated, already replaced bulb/element, drivers side low beam works as well as both high beams. Thanks.

Nov 27, 2011 | 07:54 PM

CHRYSLER TECH

Super Moderator

Joined: Mar 2006

Posts: 9,143

From: Norcross GA

possible front control module or IPM

Nov 29, 2011 | 07:58 PM

Pappy118

Thread Starter

Junior Member

Joined: Nov 2011

Posts: 6

Thank you , is there a way to check the control module or IPM.

Nov 29, 2011 | 09:58 PM

CHRYSLER TECH

Super Moderator

Joined: Mar 2006

Posts: 9,143

From: Norcross GA

not with out a good scanner

Nov 30, 2011 | 03:54 PM

TNtech

Senior Member

Joined: Jul 2010

Posts: 1,234

From: Tennessee

Take the four screws out of the FCM, unplug it and plug it back in. The problem is where the 2 pieces mate together, it's really difficult to pin down which is the culprit.

Dec 1, 2011 | 05:35 PM

Pappy118

Thread Starter

Junior Member

Joined: Nov 2011

Posts: 6

Thank you I'll try that.

Dec 2, 2011 | 03:37 PM

Pappy118

Thread Starter

Junior Member

Joined: Nov 2011

Posts: 6

FCM removal

Is it necessary to disconnect the battery and will unplugging and replugging the FCM require something to be reset with a scanner or to clear codes. thanks very much.