Anyone know how to or have you seen a DIY on replacing the sway bar bushings yourself? I've got a minor clunk up front on my Pacifica.

Thanks. ThePacLady.

 

Not really something you want to do yourself. It really isnt difficult, but the car must be COMPLETELY OFF THE GROUND to do this. You will also need Air tools......a socket set aint gonna cut it.

There are quite a few "CLUNK -CAUSERS" on a Pac......have someone look at it before shelling out the bucks on un needed parts.

 

I done it myself on mine but the bolts where seized in rust! You wont be able to get air Tools in there, so it will be the standard wrench.. 4 Bolts that's all it is!! A good can of loose nuts and a lots of patience!!