2005 Hand Brake tighten spring mechanism
#21
Today I managed to tighten up the shoes loads. They must have needed bedding in as the tops where rounded off. Then I did your handbrake pumping procedure and all now seems perfect! Test tomorrow so will soon find out.
Thanks for the help, I'd read through those 3 threads several times they were very useful.
Thanks for the help, I'd read through those 3 threads several times they were very useful.
#22
Leedsman drive through you city for 5 minutes and you will find a dozen of these
or these in skips
Do a clefty wallah and have it away, and you have the makings of a smart crank shaped ergonomic mod for your handbrick.
or these in skips
Do a clefty wallah and have it away, and you have the makings of a smart crank shaped ergonomic mod for your handbrick.
#23
It passed!
Just as strong as footbrake now. At 20mph pull handbrake on and back wheels lock up solid. Car has to drag them.
From binding the new shoes in the top corner to 300 miles later adjusting the dial 3 rotations shows how much Bedding in they took. Then the lever was still slack so I pumped it about 30+ times (keeping button pressed) and now I have the best performing handbrake I've ever had on a car.
Really pleased. Thanks again guys
Just as strong as footbrake now. At 20mph pull handbrake on and back wheels lock up solid. Car has to drag them.
From binding the new shoes in the top corner to 300 miles later adjusting the dial 3 rotations shows how much Bedding in they took. Then the lever was still slack so I pumped it about 30+ times (keeping button pressed) and now I have the best performing handbrake I've ever had on a car.
Really pleased. Thanks again guys
Thread
Thread Starter
Forum
Replies
Last Post
mufler
Chrysler Voyager & Town & Country
0
07-12-2012 06:47 AM