Fuel Gauge and Trip/Mileage Data Not Correct.
Thread Starter
|
Junior Member
Joined: Oct 2018
Posts: 10
Fuel Gauge and Trip/Mileage Data Not Correct.
Hi All,
I had an electrical fault at the Firewall/Harness penetration. Lost a bunch of functions but I was able to repair the connections and restore, I thought my 2016 T&C Platinum/Limited to proper function. However when I went to the Fuel Station I found that the gauge will not indicate above 3/4 full even when there is 20 gallons and the trip/DTE indicator is not showing the correct info by hundreds of miles. Another issue is that the side door pillar close command switches have stopped working.
I understand that an Instrument Cluster Diagnostic/Reset may help the gauge issues however I cannot find the procedure for the electronic cluster version I have in my Van. Hopefully someone in this forum may be able to help.
Tks,
DS
I had an electrical fault at the Firewall/Harness penetration. Lost a bunch of functions but I was able to repair the connections and restore, I thought my 2016 T&C Platinum/Limited to proper function. However when I went to the Fuel Station I found that the gauge will not indicate above 3/4 full even when there is 20 gallons and the trip/DTE indicator is not showing the correct info by hundreds of miles. Another issue is that the side door pillar close command switches have stopped working.
I understand that an Instrument Cluster Diagnostic/Reset may help the gauge issues however I cannot find the procedure for the electronic cluster version I have in my Van. Hopefully someone in this forum may be able to help.
Tks,
DS
Thread
Thread Starter
Forum
Replies
Last Post