No sound after changing radio?
Junior Member
Joined: Nov 2021
Posts: 1
Hey here. Accidentally stumbled inhere while trying to install a new Pioneer radio into a 2005 Chrysler T&C without canbus. I.e. the radio 22-connector plug just has the pin 14 as PCI-Bus (the rest of wire is standard power and speakers.)
I have tried several adapters for SWC, but the most seems to have just pin 12,13 and 15 wired, not the14! Very strange.
Question: Would this pin 14 (PCI connector) be the right one for AMP ON signal, or do I need to venture into this: https://www.caraudiocentre.co.uk/pro...0c_p-36162.htm
Where it seems that the AMP ON is a blue/white wire that needs to be attached somewhere (not shown by vendor)
Hit me back with ideas,
Cheers
Mike
I have tried several adapters for SWC, but the most seems to have just pin 12,13 and 15 wired, not the14! Very strange.
Question: Would this pin 14 (PCI connector) be the right one for AMP ON signal, or do I need to venture into this: https://www.caraudiocentre.co.uk/pro...0c_p-36162.htm
Where it seems that the AMP ON is a blue/white wire that needs to be attached somewhere (not shown by vendor)
Hit me back with ideas,
Cheers
Mike
Thread
Thread Starter
Forum
Replies
Last Post
