Sliding door wont open while on park
Hi i have a chrysler town and country 2008 and for some reason my sliding door wont open while engine is on
But when engine is off it opens |
Originally Posted by Miggs8804
(Post 110801)
Hi i have a chrysler town and country 2008 and for some reason my sliding door wont open while engine is on
But when engine is off it opens |
Originally Posted by AlanC
(Post 110802)
It won't open while in Drive. You need to be in Park to open any of the power doors.
|
Don't know if this would do it, but i'm sure the doors used to have an auto lock function, that could be turned on or off via the overhead info panel.
I'd think a locked door should open, but worth a check. |
Originally Posted by Scotsman4th
(Post 110806)
Don't know if this would do it, but i'm sure the doors used to have an auto lock function, that could be turned on or off via the overhead info panel.
I'd think a locked door should open, but worth a check. |
Originally Posted by Miggs8804
(Post 110807)
I dont see a on and off switch for auto lock but dont know if my t&c is equipped with it
|
https://cimg5.ibsrv.net/gimg/www.chr...ca570ecb08.jpg
No need to start a new thread on the same subject, it'll just get confusing. On my 2007 model, the auto lock function is controlled in the overhead computer settings. What about the child door locks, have you checked them? |
Originally Posted by AlanC
(Post 110830)
https://cimg5.ibsrv.net/gimg/www.chr...ca570ecb08.jpg
No need to start a new thread on the same subject, it'll just get confusing. On my 2007 model, the auto lock function is controlled in the overhead computer settings. What about the child door locks, have you checked them? |
That, [lock/unlock] correct me if I'm wrong in the EVIC is to stop anyone/child intentionally/inadvertently opening a door. It is auto executed by the BCM above 15 mph. It exists on many platforms but is pretty much across the whole Chrysler/Dodge range software(s).
|
Originally Posted by QinteQ
(Post 110835)
That, [lock/unlock] correct me if I'm wrong in the EVIC is to stop anyone/child intentionally/inadvertently opening a door. It is auto executed by the BCM above 15 mph. It exists on many platforms but is pretty much across the whole Chrysler/Dodge range software(s).
|
All times are GMT -5. The time now is 09:36 PM. |
© 2024 MH Sub I, LLC dba Internet Brands