Town and Country lifter orientation

Reply Subscribe

Thread Tools

Search this Thread

May 21, 2012 | 07:46 PM

stmiller96

Thread Starter

Member

Joined: Apr 2012

Posts: 32

Town and Country lifter orientation

After putting everything back together in my 2004 T and C 3.3 I noticed the old lifters have a small hole on the side of the lifter, but only one. Does the orientation matter? Please tell me it doesn't.

May 21, 2012 | 09:25 PM

TNtech

Senior Member

Joined: Jul 2010

Posts: 1,234

From: Tennessee

Take it back apart. You may be able to use a gear wrench to get the retainers out, then you can just spin them around. I haven't done one wrong in a while and can't remember for sure.

Quote:

Install the hydraulic lifters with the lubrication hole facing upward towards middle of block

Last edited by TNtech; May 21, 2012 at 09:28 PM.

May 22, 2012 | 05:59 AM

stmiller96

Thread Starter

Member

Joined: Apr 2012

Posts: 32

Thank you. Not what I was hoping to hear, but would rather know. Does the oil come out of the hole and lube the lifter wall? Or is the oil fed through there from the lifter wall?