2.7 engine swap issues
Thread Starter
|
Junior Member
Joined: Oct 2009
Posts: 1
2.7 engine swap issues
I have a 2007 Sebring with the 2.7 V6. I needed to chaneg the engine and found a 2009 2.7 V6 from an Avenger. The intake manifold is slightly different. There appears to be some sensor or servo device on the 2007 manifold and wiring harness that is not on the 2009. What is this and is it necessary? If I want to use the 2009 manifold, will there be a problem if this other wire is not plugged in or can I block it off some how? Thanks
Senior Member
Joined: Sep 2009
Posts: 369
I have a 2007 Sebring with the 2.7 V6. I needed to chaneg the engine and found a 2009 2.7 V6 from an Avenger. The intake manifold is slightly different. There appears to be some sensor or servo device on the 2007 manifold and wiring harness that is not on the 2009. What is this and is it necessary? If I want to use the 2009 manifold, will there be a problem if this other wire is not plugged in or can I block it off some how? Thanks
Thread
Thread Starter
Forum
Replies
Last Post
sebringphanatic
Chrysler 200 & Sebring
1
Jul 25, 2009 12:03 AM
andbudzi
Chrysler 200 & Sebring
10
Feb 20, 2008 04:07 PM
