2000 Sebring 2.5 P0300 - Chrysler Forum - Chrysler Enthusiast Forums

General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

2000 Sebring 2.5 P0300

Reply

 
 
 
  #1  
Old 04-03-2018, 02:57 PM
Junior Member
Thread Starter
Join Date: Apr 2018
Posts: 2
Default 2000 Sebring 2.5 P0300

I am currently trying to diagnose a 2000 sebring with a p0300 code. Looked at misfire monitor, at idle no cylinders are misfiring, as I increase throttle there are many random misfires. Whoever looked at it before changed o2 sensor, plugs, wires, distributor, crank and cam sensors (with aftermarket sensors.) One strange thing I noticed is that spark advance spikes to 128 degrees BTDC randomly, this is only a quick spike then goes back to around 20 degrees. From what I've read crank and cam sensors are supposed to be replaced with OEM only on these vehicles. Still haven't had a chance to check fuel pressure yet. EGR seems to be working properly. Anymore info on this issue would be greatly appreciated.

Thanks,
Joe D.
 
Reply With Quote
  #2  
Old 04-03-2018, 03:11 PM
Junior Member
Thread Starter
Join Date: Apr 2018
Posts: 2
Default

Coil rather than distributor...
 
Reply With Quote
  #3  
Old 04-03-2018, 03:21 PM
Senior Member
Join Date: Jul 2017
Location: Western NY
Posts: 504
Default

Can we clarify which motor size, I have a 98 mitsubishi 2.5 avenger and it uses a distributor. and they go to year 2000. Do you have the 2.4 possibly?
 
Reply With Quote
Reply
 
 
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1978DODGE
New Member Area
1
01-28-2013 07:20 PM
uglyveedub
Chrysler 200 & Sebring
3
07-17-2012 10:41 PM
CarolinaChuck
General Tech
6
05-28-2011 09:36 AM
CarolinaChuck
Chrysler 200 & Sebring
0
05-12-2011 08:24 AM
abiffmaster
300M, Concorde, LHS, New Yorker
0
08-28-2007 11:00 AM


Thread Tools
Search this Thread
Advertising
Featured Sponsors
Vendor Directory