IAT Sensor Location 07 Aspen?
Super Moderator
Joined: Mar 2006
Posts: 9,137
From: Norcross GA
RE: IAT Sendor Location ?
5.7L V-8
The intake manifold air temperature (IAT) sensor is installed into the front of the intake manifold air box plenum (1). 1. Disconnect electrical connector (2) from IAT sensor. 2. Clean dirt from intake manifold at sensor base.
3. Gently lift on small plastic release tab (3) and rotate sensor about 1/4 turn counterclockwise for removal. 4. Check condition of sensor O-ring
[IMG]local://upfiles/1033/0F154C6A688F4BFEB8F6FC28D107EAAF.gif[/IMG]
The intake manifold air temperature (IAT) sensor is installed into the front of the intake manifold air box plenum (1). 1. Disconnect electrical connector (2) from IAT sensor. 2. Clean dirt from intake manifold at sensor base.
3. Gently lift on small plastic release tab (3) and rotate sensor about 1/4 turn counterclockwise for removal. 4. Check condition of sensor O-ring
[IMG]local://upfiles/1033/0F154C6A688F4BFEB8F6FC28D107EAAF.gif[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
