General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

stalling issues

Thread Tools
 
Search this Thread
 
Old Sep 29, 2021 | 07:42 AM
  #1  
jghaenlein's Avatar
Thread Starter
|
Junior Member
Joined: Apr 2021
Posts: 4
Default stalling issues

Hi all. I have a 2008 aspen, 5.7 with 228,000 miles on it. I recently had the fuel pump replaced ( last week) due to it cranking, but the engine not starting. When I drove it home from the shop I hit a decent sized pothole, which seemed to trigger the car to stall. I pulled to the side, turned the key off, then turned it back on, and the engine started right back up. I took it back to my mech, but after road testing it for 80 miles, he couldnt make it stall again, and chalked it up to an air bubble in the gas line from the new pump being put in. While driving to work this morning, I hit another pothole ( its NoVa, so yeah our roads can be a bit sucky), which again triggered a stall. I again pulled to a stop, (luckily no one was behind me), turned off the key and turned it back on, and again the engine started right up, and it drove fine the rest of the way to work. My question is, wtf is causing the stalling, and what can be done about it? thanks in advance.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hoovied
Chrysler PT Cruiser
0
Aug 4, 2021 06:33 PM
brewman
Chrysler Aspen
8
May 18, 2014 08:27 AM
tburgess
General Tech
1
Mar 19, 2014 04:38 PM
1bluemule
Past Chrysler Models
1
Oct 13, 2011 11:18 AM
mike96jxi
Chrysler 200 & Sebring
4
May 18, 2010 12:24 AM




All times are GMT -5. The time now is 06:17 AM.