Hello new to forum, have been reading and love this useful site..... I just purchused a 01 sebring lxi, the person i boughty the car from tore the engine apart which was a 2.7.. I did a engine swap using the harness from orginal engine in car, i have changed ckp, cam shaft, vss sensor. I have also check 2 see if asd was trip it isnt. i have fuel coming to injectors, i have current to the connector that goes into the coil, but i have no spark at the plug.. the engine cranks, it will want to kick over if i spray starting fluid in tb.. but without the starting fluid it just cranks.. i need help bad it has been driving me crazy for the last to weeks.. all fuses are good and not blown.....someone PLEASE HELP...

 

unplug the cam sensor let me know if it will start

 

i tried that b4 i changed the sensor nothing, it did the same thing.

 

u tried to unplug the cam sensor and still not start ??
hold it over for say 10 seconds

 

i unplugged the sensor and nothing cranked but did not fire. I also changed camshaft sensor nothing. i have codes p0340, p1193, p0725 and p0700. i know anything is possible but do thing pcm needs to be rebooted?

 

hey tech i just found out that i have a 04 sebring engine. it is not a 01 a thought. any sugesstions

 

as I was saying if the cam sensor is unplugged it will start up due to the fact that U have a different engine installed and the wrong cam tone wheel.

 

hey tech did everything that u said and still have no spark what else could it be?