Originally Posted by ggoose

The decklid wiring harness is attached to the right (passenger side) hinge. There are a number of wires in the harness but from some pictures I have seen, the broken wire(s) are apparent.

For about $50 you can get the appcar-diagfca software app and for $50 get an OBD link that plugs into the OBD port by the driver's left knee. The appcar app will pull codes from the ptcm and will allow you to see the status of the various top sensors.switches, The appcar app will also allow you to operate the top step by step.

I have attached a link to a Gen 3 Top Repair guide put together by a number of contributors on the 'sebringclub.net' forum - dedicated to the care and feeding of sebring/200 convertibles. The guide has a detailed step-by-step for operating the top using the appcar app, list of dtc's (trouble codes) and a chart showing the state of each of the micro-switches at each step of the top operation. Note that using the guide will allow you to manually operate (open/close) the top and allow you to complete the top operation.

The top repair is post #10 in this link

https://sebringclub.net/2010-sebring...on-t36318.html