Just can't shake this code
Thread Starter
|
Junior Member
Joined: Feb 2016
Posts: 8
Just can't shake this code
Code P0401 EGR insufficient flow detected
I Replaced the EGR and i am still getting this code after about 10 miles of driving after resetting the code... Any ideas where to go from here
I Replaced the EGR and i am still getting this code after about 10 miles of driving after resetting the code... Any ideas where to go from here
Last edited by Extortion00; Feb 18, 2016 at 12:21 AM.
Senior Member
Joined: Aug 2009
Posts: 223
I'm not arguing with Chrysler Tech, but for what its worth I did change mine out with an EGR from O'reilly for a different issue -sluggish acceleration and idle maneuvering stalling- and have had no codes or problems. I have, on Honda's and a few Fords cleaned out "EGR ports" in the intake. On both vehicle makes several were clogged with carbon buildup. I'm not sure if the Pac engines have similar issues. Kevin?
Also, RockAuto sells an OEM EGR.
Also, RockAuto sells an OEM EGR.
Last edited by busboy4; Feb 21, 2016 at 01:18 PM.
Super Moderator
Joined: Mar 2006
Posts: 9,135
From: Norcross GA
the P0401 EGR insufficient flow detected which teh computer controls the solenoid plunger inside the egr to add or take away the amount of exhaust that the system wants. so if the egr was replaced already and your getting this code either the port is flawed or its not fact enough for the computer to allow it to work. been there done that with the pacs
Thread
Thread Starter
Forum
Replies
Last Post
97K15004WD
Chrysler Voyager & Town & Country
3
Aug 26, 2007 07:35 PM
