Then u have a computer issue or a wire issue cam or crank sensor. Issue. I don't take personal calls sorry I can't open that door I already get calls and emails from all over the world

Are you getting communication with the PCM at all? I guessing some dingaling at the dealer just saw that and threw a PCM at it.

yes i have a data stream from the pcm

What does your cam/crank sync look like? Give it about 15 secs of cranking see if you see one of them drop out. I want to be clear on something first...is the new PCM they put in still in the car?

yes the replacement pcm is the one in the vehicle now. my scanner only shows rpm and it stays at 0 during crank

my books here bypass the 01/02 yr mods and dont show where the crank sensor is can u let me know the loc of that sensor

driver side where the trans and engine meet

there are two paramaters out of range to go with the codes stored
tps reads 100% and unplugged it still is @ 94
cts reads -40 @59f outside

Sure looks like you have 5V reference circuit issue. What the exact problem with it is, there is no way I can tell you from here. Lots of meter probing.

i know it would take time and alot of effort for anyone to help me with this veh. wish i was able to find a pay for tech support that was credible so i had the info make this veh run again because i know i can