Dash light Town & Country -99
#1
Dash light Town & Country -99
Hello
I have this problem the dash light is "dead". It started to go on and off but now it's always off. Everything elseworks fine speedmeter and so on. Pleas help me so I dont have too use a torchto see my speed.
Regards, Anteman
I have this problem the dash light is "dead". It started to go on and off but now it's always off. Everything elseworks fine speedmeter and so on. Pleas help me so I dont have too use a torchto see my speed.
Regards, Anteman
#4
RE: Dash light Town & Country -99
well got 2 ideas First the more expensive route replace the printed ckt board and have some one program the guages when done or there are posts on here for a solder fix bight be for your issue not sure but seen it on here. If it was one bulb I would say replace the bulbs or all of them but if they all went out at the same time na board issue
#6
RE: Dash light Town & Country -99
I don't think it i's a solding problem. The pins on the red socket have contact with the lamps (the + pin is a little bit burned). So I presume there is no power to the red socket. Can someone give me a hint how to procede the problemsolving?
#8
RE: Dash light Town & Country -99
okay. but one thing bothers me. no 12Vone the pins in the redsocket, power to the 194 lamps("big ones"). it i's only teh 194 lamps that dont work. everything else works just fine. and one thing more there is no power on fuse #1 and 3 the one for the gauge lamps??