'06 T&C Touring, servo is activating when door is fully open, have had to drive home with door tied shut twice now. To unlock, had to remove lock & trigger mechanism open. Tried swapping control module with other side, which is working fine, but is still doing it. Finally removed servo from lock so we can use the door. Could it be a short in wiring harness?

 

wdwrker1:

Sounds like that may be an issue with the door striker or possibly even the Power Sliding Door Module (PSDM) inputs need to have software updated / reset.

 

I would agree, except now the module which was controlling the drivers side sliding door is now on the passengers side, and working fine. Which has led me to think that it is getting wrong information (ie. door is closed, lock) from the harness, I can't see anything else sending this message to the module.