Replacing window regulator system.....
#1
Replacing window regulator system.....
........on my 02 T&C, driver side. Bought the Dorman unit from Amazon, installed it. Everything perfect except that the window is hanging up when it gets to about 1 inch from fully closed.
Don't know, and can't see or feel, what it's hanging up on. As long as I don't raise it above that 1 inch, it works great. Past that it has hung up 2 times requiring me to loosen the track screws at bottom and top, remove the window from the frame connectors, and jiggle/wiggle/finagle the window loose & start over.
I'm not sure if the Amazon replacement is correct (the frames are a little different than the OEM...as are the white plastic connectors & clips that hold the window to the frame). But, it all fits perfectly except for the hang-up.
Anyone have any familiarity with this?
Thanks in advance,
Chuck
Don't know, and can't see or feel, what it's hanging up on. As long as I don't raise it above that 1 inch, it works great. Past that it has hung up 2 times requiring me to loosen the track screws at bottom and top, remove the window from the frame connectors, and jiggle/wiggle/finagle the window loose & start over.
I'm not sure if the Amazon replacement is correct (the frames are a little different than the OEM...as are the white plastic connectors & clips that hold the window to the frame). But, it all fits perfectly except for the hang-up.
Anyone have any familiarity with this?
Thanks in advance,
Chuck
Last edited by chuckiebtoo; 01-03-2012 at 08:38 AM.
Thread
Thread Starter
Forum
Replies
Last Post
57toplessatlast
General Tech
1
10-11-2013 08:26 AM
motley1987
Chrysler 200 & Sebring
1
05-25-2013 08:54 PM
garyw
Chrysler Voyager & Town & Country
1
04-17-2009 07:19 PM
TrickyTree
Chrysler Voyager & Town & Country
0
08-31-2008 05:09 AM