01 sebring convertible
Thread Starter
Joined: Apr 2006
Posts: 22
From:
01 sebring convertible
ive got a 01 sebring lx convertible and when the top is up(closed) only the passenger corner seals completely causing horrible wind resistance on the driver side. what can i do to make it seal completely all around
Super Moderator
Joined: Mar 2006
Posts: 9,135
From: Norcross GA
RE: 01 sebring convertible
ADJUSTMENTS - DOWEL PIN
Loosen dowel pins (ROOF LATCH AND GUIDE DOWEL PIN).
Position dowel pins to the center of the receiver holes in the windshield header.
Tighten dowel pins and verify adjustment.
NOTE: Refer to Cam Adjustment or Balance Link Adjustment paragraphs of this section to adjust forward or rearward position of the top header.
[IMG]local://upfiles/1033/23CD908B16554C539FFF2E9C6D582631.gif[/IMG]
Loosen dowel pins (ROOF LATCH AND GUIDE DOWEL PIN).
Position dowel pins to the center of the receiver holes in the windshield header.
Tighten dowel pins and verify adjustment.
NOTE: Refer to Cam Adjustment or Balance Link Adjustment paragraphs of this section to adjust forward or rearward position of the top header.
[IMG]local://upfiles/1033/23CD908B16554C539FFF2E9C6D582631.gif[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
01-06 Chrysler Sebring Sedan, Chrysler Sebring Convertible, and Dodge Stratus Sedan SRT-4 Style Hood
SebringLX
Member Group And Special Buys
0
Sep 21, 2006 06:00 PM
