General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

car holding back

Old Jun 8, 2022 | 06:37 AM
  #1  
MeSteve's Avatar
Thread Starter
|
Junior Member
Joined: Apr 2022
Posts: 8
Default car holding back

the car seems to lack power when it gets to working temp and on motorway the car suddenly surges and turbo kicks in properly,
engine management light comes on .the reading is a speed sensor so ive replaced both speed sensors but it still doing it.the speedo doesnt work neither does the mileometer
im at a loss .any help would be most apprechiated..
sorry for spelling and punctuation.
ste
 
Old Jun 8, 2022 | 12:30 PM
  #2  
MeSteve's Avatar
Thread Starter
|
Junior Member
Joined: Apr 2022
Posts: 8
Default

ive done the key dance and got 2 codes 200.6 and 200.7,
my manual tells me nothing at all about them,
could do with some help peoples
ste
 
Old Jun 11, 2022 | 07:30 AM
  #3  
ggoose's Avatar
Senior Member
Joined: Oct 2020
Posts: 586
From: Chicago, IL
Default

Please start with the basics, year-model-mileage. Is this a diesel engine?

Turbos do not kick in but spin up with increased exhaust flow from engine rpms. The only lag/delay a turbo has is when first starting out as the turbo has not spun up enough to generate any meaningful psi increase for more power.
 
Old Jun 11, 2022 | 11:08 AM
  #4  
MeSteve's Avatar
Thread Starter
|
Junior Member
Joined: Apr 2022
Posts: 8
Default

model is a 2006 grand voyager ,milage unknown mileometer doesnt read and yes its a 2.8 crd diesel ,
the engine holds back on acceleration ,when the eml comes on you can feel the pull from the engine.
it feels like the turbo isnt doing anything until the eml shows.
Petrol engines im good with, diesels not so
ste
 
Old Jun 12, 2022 | 07:05 PM
  #5  
dcotter0579's Avatar
Senior Member
Joined: May 2008
Posts: 5,649
From: Detroit suburb
Default

Try searching for codes expressed as follows:
P2006
P2007
 
Old Jun 13, 2022 | 12:05 PM
  #6  
MeSteve's Avatar
Thread Starter
|
Junior Member
Joined: Apr 2022
Posts: 8
Default

Thanks for the reply,
ive looked up the codes and looks like some work on intake system,
ill have a look tomorrow .
thanks again very helpful
ste
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ingvor Sabina Le John
Chrysler PT Cruiser
4
Oct 14, 2021 09:25 AM
Eric c
Chrysler PT Cruiser
1
Dec 21, 2020 12:40 PM
tkstewar
300M, Concorde, LHS, New Yorker
10
Jan 27, 2013 03:52 PM
cjkronberg
Chrysler Pacifica
1
Oct 26, 2011 12:37 PM
94gtc
General Tech
1
Feb 19, 2007 11:16 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:47 AM.