98 Concorde 3.2

Reply Subscribe

Thread Tools

Search this Thread

Jul 25, 2015 | 03:40 PM

SeanTX

Thread Starter

Junior Member

Joined: Jul 2015

Posts: 12

98 Concorde 3.2

No start

she drove it home yesterday. Engine turns over but that is it. Had a code back in june.. Code PO306 replaced all the spark plugs and one coil pack. I just put in a fuel pump relay. Still won't start

Ideas?

Jul 25, 2015 | 04:04 PM

CHRYSLER TECH

Super Moderator

Joined: Mar 2006

Posts: 9,143

From: Norcross GA

missing spark or fuel see which one

Jul 26, 2015 | 11:57 AM

SeanTX

Thread Starter

Junior Member

Joined: Jul 2015

Posts: 12

No spark. Just got the chance to check!

Jul 26, 2015 | 03:06 PM

SeanTX

Thread Starter

Junior Member

Joined: Jul 2015

Posts: 12

No power to 2-20 amp fuses in fuse and relay center. 20 amp inj/coil and 20 amp ASD

Jul 27, 2015 | 04:52 PM

SeanTX

Thread Starter

Junior Member

Joined: Jul 2015

Posts: 12

Anything?

Jul 27, 2015 | 11:33 PM

CHRYSLER TECH

Super Moderator

Joined: Mar 2006

Posts: 9,143

From: Norcross GA

ok which fuses there are many 20 amp fuses

Jul 28, 2015 | 05:35 AM

SeanTX

Thread Starter

Junior Member

Joined: Jul 2015

Posts: 12

The ones listed above ASD and

Jul 28, 2015 | 01:30 PM

CHRYSLER TECH

Super Moderator

Joined: Mar 2006

Posts: 9,143

From: Norcross GA

helps out zero not infront of the car to see this. look under the cover and tell me what the fuses are designated to

Jul 29, 2015 | 07:16 AM

SeanTX

Thread Starter

Junior Member

Joined: Jul 2015

Posts: 12

The 2 20 amps on lower left.

Jul 29, 2015 | 11:49 AM

#10

CHRYSLER TECH

Super Moderator

Joined: Mar 2006

Posts: 9,143

From: Norcross GA

the asd only has power on it when the car is running or it is starting it will not supply power to the injectors or coil unless it cranking.

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Reply Share

First
Prev
1 / 2
Next
Last