Chrysler Pacifica Luxury meets versatility in this mid-sized sport utility vehicle

05 Pacifica with some issues

Old Mar 8, 2013 | 10:13 AM
  #1  
ccusum21's Avatar
Thread Starter
|
Junior Member
Joined: Apr 2012
Posts: 6
Default 05 Pacifica with some issues

I have an 05 Pacifica with some issues that I can use some help on. I have an AWD touring with all the bells and whistles.

1. On the NAV control buttons one of the lights went out. How do I take out the NAV control buttons to replace the light?

2. NAV module took a crap, is there a fix for it or do I have to spend the 500.00 to get it replaced?

3. How hard is it to do a tune-up on these things?

4. I had some front end work, well a lot of front end work and the car still sounds like somehting is going to fall off when hitting a slight bump in the road.

thanks, and I look forward to your response.
 
Old Apr 12, 2013 | 12:02 AM
  #2  
lilrobert1's Avatar
Junior Member
Joined: Apr 2013
Posts: 6
Default

Tune up is EASY I have the 05 front whl drive 3.5L found a good video on
youtube shows you how
 
Old Jul 3, 2013 | 06:14 PM
  #3  
Stephane Parent's Avatar
Junior Member
Joined: Jul 2013
Posts: 8
Default

For the front end noise check the sway bar bushing..pretty easy to do if you can use RAMP to roll over and get the car up...go Under and locate the sway bar.. grab it on the side where it conect with the end link and shake it forward and aft..if you here the noise ..well you found your problem..just changed mine today and got rid off the noise..
 
Old Jul 3, 2013 | 08:23 PM
  #4  
cirrus98's Avatar
Senior Member
Joined: May 2008
Posts: 120
From: Gatineau, QC, Canada
Default

Originally Posted by Stephane Parent
For the front end noise check the sway bar bushing..pretty easy to do if you can use RAMP to roll over and get the car up...go Under and locate the sway bar.. grab it on the side where it conect with the end link and shake it forward and aft..if you here the noise ..well you found your problem..just changed mine today and got rid off the noise..
Other than being seized in rust, was there any complication?? I took a quick glance at mine and on the driver side, gaz/brake lines and the passenger side, exhaust seem to be in the way. Did you just drive it up on ramps or did you lift it and remove the tires????
 
Old Jul 4, 2013 | 11:43 AM
  #5  
Stephane Parent's Avatar
Junior Member
Joined: Jul 2013
Posts: 8
Default

I drive it on the ramp but lifting it and removing the wheels could make it easyer.
From under the truck you can see the 4 bolts that need to be removed.. remove the metal part that hold the bushing in place and remove the bushing...reverse order for instal...good idea to lubricat the bushing with lithium grease!

It is a tight fit for the front bolts but nothing major!!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
elusive416
Chrysler Aspen
26
Jul 2, 2015 10:07 AM
ricesnaps
Chrysler Voyager & Town & Country
10
May 29, 2014 05:03 PM
missb2004
New Member Area
1
Dec 9, 2013 10:40 PM
titanium
General Tech
6
Dec 14, 2010 09:02 AM
Midnight 85
Off Topic
3
Mar 23, 2006 05:00 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:27 PM.