1999 Voyager 2.5TD loosing power at 2000rpm
#11
Dazzzzbo, how did you get the egr valve off? What tool did you use? I stripped the parts back as far as removing the pipe that goes to the turbo after that I can't access the bolts as there is no room for a socket or a spanner.
Thanks
Thanks
#12
Hi Bruce
I only removed the valve itself off the manifold. I just used a 1/4" drive socket with a uv joint adapter. I just did it by feel though as you can't see anything. I so wish all these bits were in front if engine lol.
I only removed the valve itself off the manifold. I just used a 1/4" drive socket with a uv joint adapter. I just did it by feel though as you can't see anything. I so wish all these bits were in front if engine lol.
Thread
Thread Starter
Forum
Replies
Last Post
Ephata
Chrysler Voyager & Town & Country
18
06-04-2014 02:14 PM
hoef
Chrysler Voyager & Town & Country
0
03-23-2011 11:17 AM
shadetreemech
General Tech
0
04-12-2008 09:08 AM