Hi everyone! Im in the uk and was wondering if anyone has fitted bigger brakes from another chrysler or of the shelf kits?

 

Is it possible? Had to get balancing weights removed from my alloys as they were fitted on the inside for cosmetic reasons (by the fitter). Even 2-3mm thickness was catching on the caliper.

 

Thanks for the reply scotsman4th
what brakes did you fit?

 

That was with standard discs, calipers and alloys when I got the tyres changed. Had to go back and get the weights removed, and the wheels rebalanced with weights on the outside. There's not much clearence in there.
Others may know of something, but I'm guessing uprated discs and pads might be the best you could hope for.

 

No idea, because we have no idea what your year is my friend, examples below.

2005

Centre Hole Size (mm): 73.5, Outer Diameter (mm): 301, Overall Height (mm): 39, PCD: 114.3, Thickness (mm): 28, Minimum Thickness (mm): 26.5, Fitting Holes / Studs: 5

2008

Centre Hole Size (mm): 72.6, Outer Diameter (mm): 305, Overall Height (mm): 33, PCD: 127, Thickness (mm): 12, Minimum Thickness (mm): 10.5, Fitting Holes / Studs: 5

 

I have a 54 (2005) grand voyager 2.8 crd