Engine Management Light after Jump Start

Reply Subscribe

Thread Tools

Search this Thread

Nov 21, 2015 | 10:51 AM

Fayraz

Thread Starter

Junior Member

Joined: Jul 2014

Posts: 23

Engine Management Light after Jump Start

Hi,

I have got a 2010 Grand Voyager and had to jump start it today because I have not used it for about 2 weeks. After I jump started it the engine management light is on?

Nov 21, 2015 | 01:08 PM

goggs

Senior Member

Joined: Nov 2012

Posts: 1,782

From: Dumfries....

Interesting to know the fault code....Key Dance ?
Ah wait is this process different on a 2010..

Last edited by goggs; Nov 21, 2015 at 01:10 PM. Reason: reassessing answer.

Nov 21, 2015 | 08:47 PM

georgef

Senior Member

Joined: Aug 2012

Posts: 188

From: Vermont USA

Quote:

Originally Posted by goggs

Interesting to know the fault code....Key Dance ?
Ah wait is this process different on a 2010..

Yes, the key dance is slightly different on the 2008 and up minivans. The sequence is:
ACC / ON / ACC / ON / ACC / ON

The codes will appear in the odometer readout.

This was previously discussed here: Service engine light 2009 T&C

Nov 21, 2015 | 08:49 PM

georgef

Senior Member

Joined: Aug 2012

Posts: 188

From: Vermont USA

Quote:

Originally Posted by Fayraz

Hi,

I have got a 2010 Grand Voyager and had to jump start it today because I have not used it for about 2 weeks. After I jump started it the engine management light is on?

Try the "key dance" and report back with any codes you retrieve, then someone here may be able to provide some help.

Nov 22, 2015 | 04:55 AM

Fayraz

Thread Starter

Junior Member

Joined: Jul 2014

Posts: 23

Hi,

Did the key dance and the error code I get is first "----------" and then "d0nE".

Last edited by Fayraz; Nov 22, 2015 at 05:04 AM.

Nov 25, 2015 | 01:05 PM

Fayraz

Thread Starter

Junior Member

Joined: Jul 2014

Posts: 23

After driving for a few days the engine management light has now gone off.

Nov 26, 2015 | 01:46 AM

tfb

Senior Member

Joined: Dec 2012

Posts: 705

From: UK

some codes will self clear not when the fault is cleared, but after X number of good starts or Y operations of Z components.

Glad it's gone though

Richard