Chrysler Voyager & Town & Country The first and foremost name in minivans leading the class since their inception in the 1980s

I need help!!!

Old Nov 21, 2006 | 10:08 PM
  #1  
m.squiers1984's Avatar
Thread Starter
Joined: Nov 2006
Posts: 2
Default I need help!!!

I have a 2003 Voyager and a few things are going wrong. When I hit even the slighest bump I hear a clunking noise in the front. My heater and A/C only work on high, and I cant figure out which brake pads I need for the front. I called a few auto parts stores for the front brake pads and I got the wrong ones, they look totally different than the ones that are on there now. I have a 4 cyl. without ABS. CAN ANYONE HELP ME ?????????[:@]
 
Old Nov 22, 2006 | 04:36 AM
  #2  
webbee's Avatar
Joined: Mar 2006
Posts: 54
Default RE: I need help!!!

Can't say about the brake pads. The clunk is either the sway bar ends or the bushings. The heater/ac blower resistor is shot. Replace and it will work fine.
 
Old Feb 28, 2007 | 03:54 PM
  #3  
Prost264's Avatar
Joined: Feb 2007
Posts: 3
Default RE: I need help!!!

I am having the same problem in my Town & Country. When going over the slightest bump I get clunking from the front end. Its been to the shop a few times and no one can figure it out.
 
Old Feb 28, 2007 | 06:16 PM
  #4  
CHRYSLER TECH's Avatar
Super Moderator
Joined: Mar 2006
Posts: 9,137
From: Norcross GA
Default RE: I need help!!!

sway bar links and bushings are the main deals on new TnC
 
Old Mar 1, 2007 | 03:42 PM
  #5  
latreto's Avatar
Joined: Nov 2006
Posts: 28
Default RE: I need help!!!

hello

I think I have the same problem ...... Is it the stabilizer bar or the bushing that fix it to the car?

regards

Rafael
 
Old Mar 1, 2007 | 06:03 PM
  #6  
CHRYSLER TECH's Avatar
Super Moderator
Joined: Mar 2006
Posts: 9,137
From: Norcross GA
Default RE: I need help!!!

if its the same noise that i heard all the time yep
 
Old Mar 3, 2007 | 10:54 PM
  #7  
Prost264's Avatar
Joined: Feb 2007
Posts: 3
Default RE: I need help!!!

Bushings ordered the other day, looking forward to no more clunking at every bump.
 
Old Mar 25, 2007 | 09:39 PM
  #8  
Prost264's Avatar
Joined: Feb 2007
Posts: 3
Default RE: I need help!!!

I put the new bushings on and now its good as new, thanks guys.
 
Old Dec 15, 2007 | 12:00 AM
  #9  
jeff1960's Avatar
Joined: Dec 2007
Posts: 4
Default RE: I need help!!!

Here's my story:
2003 T & C. Front blower goes directly to highas soon as I start the van.Stays constant on higheven when I turn off the system.Took to dealer and told me the blower needs replacing. Headded thatthe blower is damaging the "blower resister" I found out later it'snot a resister but a "control module")and BOTH need replacing. Told me it would take 5-6 hours because he had to remove the entire dash in order to remove the blower.
I declined the $1,060.00 (yes....one thousand sixty dollars) charge to repair it
I bought a "Haynes" manual. It took me 5 minutes to remove the "resister" (which actually turned out to be a "control module") and1 hour to remove theblower. After reading numerous posts tonight, I'm going to re-install the blowerand put in a new module. I guess they think my last vehicle was a turnip wagon. (Shame is, I paid them $100.00 to diagnose the problem)
As far as the "clunk"......it's the front sway bar bushings. I had a 2000 Grand Caravan, friend had a 99....both were fixed with new bushing. (I did it for 5% costof what the dealer wanted plus my labor)
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JamesBraxton
General Tech
1
Sep 18, 2011 09:01 PM
s.wilson1978@yahoo.com
Chrysler Voyager & Town & Country
3
Jul 12, 2011 02:19 PM
musicfreak2195
Chrysler 200 & Sebring
2
Sep 19, 2008 12:47 AM
ETD66SS
300M, Concorde, LHS, New Yorker
2
Jul 3, 2005 01:33 PM
nypdalamo77
Audio/Visual Electronics
1
May 26, 2005 12:41 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:34 PM.