Petrol got finnished, refuelled, now car cant start!!!
#1
Petrol got finnished, refuelled, now car cant start!!!
Hi everyone, I have a 1996, 2,4L chrysler se. Car has been working real fine untill yesterday when I ran out of petrol. I refuelled with 8 liters petrol hoping this will take me to the filling station to add more. Engine starts and go off all the time. Tried for over 1 hour, still the same thing!!!! what should I do? now the car has been towed home and still the same problem what could be wrong!!! please kindly help me....
#2
quick way to get a chrysler going when it runs out of fuel
I had this problem with my manual Chrysler when I ran out of fuel, the only way I could get it going again was to tow start it. I towed it with the ignition on and put it into second gear, let the clutch out and it eventually started,,,
Good luck
Good luck
#3
low petrol
When you attempt to start the car the fuel pump runs for 2 seconds to pressurize the system then turns off until the engine is running. I suggest that you turn the ignition on and off many times to get the system up to operating pressure.
#4
Hi everyone, thanks a lot for your contributions. I eventually got it moving again by spraying a "Start gas" in the air intake of the engine...i.e., by disconnecting the big air pipe from the air filter to the engine and spraying the gas (3 - 4 short sprays) and vuala! the engine started at once. Thanks again for your contributions!!!!! This is a great site... Love you guys!!!! bye!!
Thread
Thread Starter
Forum
Replies
Last Post
chryslervoyager
Chrysler Voyager & Town & Country
1
06-21-2011 04:27 PM
peterjv
Chrysler 300, 300C & 300C SRT-8
7
04-21-2011 12:45 PM
JXI101
Off Topic
8
06-17-2006 10:38 PM