98 Chrysler Concorde 2.7L V6 No voltage to coils
Thread Starter
|
Junior Member
Joined: Jul 2009
Posts: 1
98 Chrysler Concorde 2.7L V6 No voltage to coils
Hello,
The vehicle wasn't starting so I thought it was a bad starter and battery. I replaced the starter and battery with a 800CCA battery and still wouldn't start. I smelled gas when trying to start the car, so I know it's not fuel pump or fuel related. I unplugged coil #1, #3, #5 and checked to see if there was voltage to each coil and there was none. Then I switched around a couple of relays or fuses to see if that was the problem and no.
This vehicle has a timing chain rather then a belt, so I know it's not that.
Any suggestions ? Thanks, James
The vehicle wasn't starting so I thought it was a bad starter and battery. I replaced the starter and battery with a 800CCA battery and still wouldn't start. I smelled gas when trying to start the car, so I know it's not fuel pump or fuel related. I unplugged coil #1, #3, #5 and checked to see if there was voltage to each coil and there was none. Then I switched around a couple of relays or fuses to see if that was the problem and no.
This vehicle has a timing chain rather then a belt, so I know it's not that.
Any suggestions ? Thanks, James
Thread
Thread Starter
Forum
Replies
Last Post
