Knocking while turning
Hey everyone I’m at my wits end. Went for an alignment after doing the front end (lower control arm, inner and outer tie rods, stabilizer links) they mentioned the rack has some play in it, and that my driver side axle boot is starting to crack. I noticed when I’m doing a hard right turn there’s clunking. So I replaced both cv axles and it’s still there. It seems to be after a hard right turn and under moderate acceleration and starting to straighten out. Would it be the rack that’s causing that? The clunking comes from under the driver side floor. TIA 🙏
[QUOTE=Brodiem;127706]Hey everyone I’m at my wits end. Went for an alignment after doing the front end (lower control arm, inner and outer tie rods, stabilizer links) they mentioned the rack has some play in it, and that my driver side axle boot is starting to crack. I noticed when I’m doing a hard right turn there’s clunking. So I replaced both cv axles and it’s still there. It seems to be after a hard right turn and under moderate acceleration and starting to straighten out. Would it be the rack that’s causing that? The clunking comes from under the driver side floor. TIA 🙏vehicle is 08 town and country 3.8 touring
Thread
Thread Starter
Forum
Replies
Last Post
shootme5150
300M, Concorde, LHS, New Yorker
2
Aug 30, 2010 04:50 AM



