New Member Area New to CF? Stop in tell us about you.

Knocking while turning

Old Aug 19, 2024 | 03:39 PM
  #1  
Brodiem's Avatar
Thread Starter
|
Junior Member
Joined: Aug 2024
Posts: 2
Default Knocking while turning

Hey everyone I’m at my wits end. Went for an alignment after doing the front end (lower control arm, inner and outer tie rods, stabilizer links) they mentioned the rack has some play in it, and that my driver side axle boot is starting to crack. I noticed when I’m doing a hard right turn there’s clunking. So I replaced both cv axles and it’s still there. It seems to be after a hard right turn and under moderate acceleration and starting to straighten out. Would it be the rack that’s causing that? The clunking comes from under the driver side floor. TIA 🙏
 
Old Aug 19, 2024 | 03:39 PM
  #2  
Brodiem's Avatar
Thread Starter
|
Junior Member
Joined: Aug 2024
Posts: 2
Default

[QUOTE=Brodiem;127706]Hey everyone I’m at my wits end. Went for an alignment after doing the front end (lower control arm, inner and outer tie rods, stabilizer links) they mentioned the rack has some play in it, and that my driver side axle boot is starting to crack. I noticed when I’m doing a hard right turn there’s clunking. So I replaced both cv axles and it’s still there. It seems to be after a hard right turn and under moderate acceleration and starting to straighten out. Would it be the rack that’s causing that? The clunking comes from under the driver side floor. TIA 🙏vehicle is 08 town and country 3.8 touring
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CanadianSebringJR
Chrysler 200 & Sebring
2
Feb 16, 2024 01:59 AM
Vikingtu
Chrysler Voyager & Town & Country
1
Apr 3, 2017 04:01 PM
adlermike
Chrysler Pacifica
4
Mar 20, 2013 11:47 AM
acmectec2001
Chrysler Voyager & Town & Country
1
Apr 24, 2011 07:41 PM
shootme5150
300M, Concorde, LHS, New Yorker
2
Aug 30, 2010 04:50 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:01 AM.