Chrysler Pacifica Luxury meets versatility in this mid-sized sport utility vehicle

clicking in transmission?

Thread Tools
 
Search this Thread
 
  #1  
Old 06-06-2011, 05:08 PM
kenjmar1's Avatar
Junior Member
Thread Starter
Join Date: Jan 2009
Posts: 3
Default clicking in transmission?

I have a 2005 Pac and I get a clicking noise everytime I accelerate or decelerate. Its sounds like it is coming from the transmission. Any help or advice would be appreciated
 
  #2  
Old 06-06-2011, 05:42 PM
Djinn-n-Tonic's Avatar
Senior Member
Join Date: Dec 2010
Location: NE PENN
Posts: 992
Default

AWD??

There is a Service bulletin for Axle Nut Torque and Isolation washer installation....

If that doesnt cure it, The noise is likely coming from PTU..(Transfer Case).
 
  #3  
Old 06-06-2011, 06:10 PM
kenjmar1's Avatar
Junior Member
Thread Starter
Join Date: Jan 2009
Posts: 3
Default

it is a FWD !
 
  #4  
Old 06-06-2011, 07:07 PM
Djinn-n-Tonic's Avatar
Senior Member
Join Date: Dec 2010
Location: NE PENN
Posts: 992
Default

Ok....

Have you had motor mounts or axles Replaced recently......

Check the torque on the axle nut. A click, Snap Or Pop, can be caused by the splines on the axle shifting in the hub, or by poor contact of the hub and shaft face.

Stay Tuned...I'll try and get you the TSB number.
 
  #5  
Old 06-09-2011, 04:56 PM
kenjmar1's Avatar
Junior Member
Thread Starter
Join Date: Jan 2009
Posts: 3
Default

I had the motor mounts replaced about 1 1/2 yrs ago !!!!!!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dubs0587
Chrysler Voyager & Town & Country
1
04-27-2010 02:35 PM
drake
Chrysler 200 & Sebring
4
01-01-2008 11:24 AM
Hawwk11
Chrysler Pacifica
2
07-13-2007 11:59 PM
13ducati13
Chrysler Voyager & Town & Country
3
09-01-2006 09:29 PM
nortcheez
Chrysler 300, 300C & 300C SRT-8
1
01-13-2006 03:03 PM



Quick Reply: clicking in transmission?



All times are GMT -5. The time now is 12:06 AM.