2007 GV CRD Brake Bleed Nipple/Screw
#1
2007 GV CRD Brake Bleed Nipple/Screw
Hi, could some good soul tell me the size of the Brake Bleed Nipples on a 2007 Grand Voyager 2.8 CRD ?.
By size, I mean the thread size i.e. M8 x 1.0, as I am going to do a fluid change, and replace the Nipples with Stainless ones.
Ta in advance
By size, I mean the thread size i.e. M8 x 1.0, as I am going to do a fluid change, and replace the Nipples with Stainless ones.
Ta in advance
#3
Got a note here for Front Bleed Screw 9402. 3/8 - 24 x 1.172
4126 879AB. Need to check the pitch to see if its UNF or UNC...
Yes 24 threads is UNF, UNC is 16. I've a pitch of 1.172 which is silly being over 1 inch. Pitch for UNF is 0.04167 Inch.
4126 879AB. Need to check the pitch to see if its UNF or UNC...
Yes 24 threads is UNF, UNC is 16. I've a pitch of 1.172 which is silly being over 1 inch. Pitch for UNF is 0.04167 Inch.
Last edited by goggs; 05-09-2018 at 01:59 PM. Reason: Zeus Operendi..
Thread
Thread Starter
Forum
Replies
Last Post
arcadiachrysler
Chrysler Voyager & Town & Country
0
03-31-2012 09:59 PM
01sebringphanatic
Chrysler 200 & Sebring
5
03-21-2007 05:34 PM